Wanderer Cover V3
Features
Before establishing connection, set the device port in the Options tab. After connection, you can Park (Close) or UnPark (Open) the panel and set the light level and turn on/off the light source.
Under the options tab, you can optionally set the INDI Filter Wheel device (whether embedded within a CCD or a standalone filter device). Make sure to save the config so that it is loaded on next start up.
Once the driver receives filter information, it shall constructions the Presets tab where you can set the desired brightness level for each filter accordingly. Therefore, whenever the filter wheel changes, the brightness level for the new filter slot is updated accordingly. This feature is very useful when taking flats via narrowband filter as they require higher brightness settings to obtain flats at a desirable ADU level. The filter-adjusted brightness settings are saved for future sessions after you save the driver configuration in the driver's tab
Driver Name
Wanderer Cover V3
Driver Executable
indi_wanderer_cover
Family
Auxiliary
Manufacturer
Wanderer Astro
Platforms
Linux, MacOS, BSD
Author
Jérémie Klein
Version
1.0
