Features
myDCP4ESP32 is an enhanced 4-Channel automated Dew Controller designed by Robert Brown, based on an ESP32 WiFi chip. The project is open sourced with details found on the project site.
Current features include:
Fully automated standalone op ...
Read More...
The Seletek is a peripheral controller developed by Lunático. This version of the driver allows to control its basic sensors and one or two focuser (three in the Platypus version) connected to the Seletek. You can check all the details about the driver an ...
Read More...
Features
INDI SQM driver support Ethernet-enabled SQM-LE and USB. The driver provides basic averaged readings from the unit including sky brightness and temperature.
Operation
Before establishing connection, set the IP address of the SQM-LE unit i ...
Read More...
Features
USB_Dewpoint calculates in real time the Dewpoint, thanks to ambiant humidity probe close to your instrument. It also connects to 2 external temperature probes (attached to tube or mirrors) and compares these temperatures to the Dewpoint. If tem ...
Read More...
Features
When operating a remote observatory, complete control of the devices rest with the remote INDI servers and drivers. In case of a communication loss, the observatory should be capable of performing a graceful shutdown until communication is esta ...
Read More...
Features
The relay controller is an industrial 8-ch relay module controlled via Ethernet port, adopts Modbus RTU/Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case.
Features flash-on, flash-off function, by p ...
Read More...
