Mounts: All Listings 

Included with libindi v1.6+. Features This driver supports Celestron telescopes using the NexStar protocol. The following models use this protocol: NexStar GPS NexStar GPS-SA NexStar iSeries NexStar SE Series NexStar GT Advanced GT CGE mo ...
Read More...

Features The driver can control any mount controllable by Synscan hand controller, it offers basic GoTo capability and parking. Current features are: Slew & Sync Slew Rates Sidereal, lunar, solar and custom trackrates Full joystick support ...
Read More...

INDI iOptron CEM120 Driver is released as a 3rd party driver and requires INDI Library >= v1.6.5. Features This INDI driver is not limited to CEM120 as it supports the following iOptron mounts: CEM120-EC2 with firmware 20171001 and later CEM120- ...
Read More...

  Features The driver supports the following Gotonova 8400 based controllers Functions such as Track, Sync (Regular and CMR), and Park are supported. Operation On connection, the mount retrieves the controller time and location and updates the c ...
Read More...

  Features The driver supports the following iEQ mounts: CEM60 (Firmware 140807 and later)CEM60-EC (Firmware 140807 and later)iEQ45 Pro (Firmware 140807 and later)iEQ45 Pro AA (Firmware 140807 and later) Functions such as Track, Sync, Guiding, Ho ...
Read More...

Features The driver supports the following mounts: ZEQ 25 SmartEQ iEQ30 iEQ45 EQ/AA Functions such as Track, Sync, and Park are supported. Operation On connection, the mount retrieves the controller time and location and updates the client acc ...
Read More...

Features This driver supports Astro-Physics mounts over a serial connection with a firmware version of 'V' or newer. Current features of the driver: Goto/Slew  Sidereal, lunar, solar and custom track rates PEM control (ON/OFF) Custom pa ...
Read More...

Features This driver supports Astro-Physics mounts with GTOCP2 controller (Firmware version E or later) over a serial connection. Current features of the driver: Goto/Slew  Sidereal, lunar, solar and custom track rates PEM control (ON/OF ...
Read More...

Features This driver supports older Astro-Physics mounts (GTOCP2 or before). It can work for later mount models, but for such models, it's better to use other drivers with more functionality. Current features of the driver: Goto/Slew  Sid ...
Read More...

Features This driver supports Astro-Physics mounts over a serial connection with a firmware version of 'V' or newer. This driver is a re-write of the previous "experimental" driver. It was written with the aim of full automation using Ekos. It is a new ...
Read More...

Installation INDI Vixen Starbook Driver is released as a 3rd party driver and requires INDI Library >= v1.7.4. This is article stub, and still needs update, for more actuall guide head to https://github.com/indilib/indi/tree/master/3rdparty/indi-s ...
Read More...

The Omegon EQ500-X Equatorial Mount driver is included with libindi >= 1.7.8. :   Features The Omegon EQ500-X Equatorial Mount driver supports: 4 Slew Rates (max, find, center and guide) Single sidereal tracking rate Goto coordinates (via ...
Read More...

INDI AZ-GTi Driver based on EQMod driver and is released as a 3rd party driver and requires INDI Library >= v1.7.5. Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through WiFi  Goto/Slew at maximum m ...
Read More...

  Features The LX200 Basic supports most functions of the EQ-6 MCU Update: Project Website Project Support and Community Operation It works with all firmware versions
Read More...

INDI AZ-GTi Driver based on EQMod driver and is released as a 3rd party driver and requires INDI Library >= v1.7.5.   Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through WiFi  Goto/Slew at m ...
Read More...

Installation INDI EQMod Driver is released as a 3rd party driver and requires INDI Library >= v0.9.7. Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher ...
Read More...

 Features The driver uses SkyWatcher protocol to directly control Alt-Az mounts without the need for the Synscan hand controller. In addition to general Park/Unpark and GOTO (SLEW) capability, it supports SYNC, TRACK and pulse guiding. It is designe ...
Read More...

Features The driver can control any mount controllable by Synscan hand controller, it offers basic GoTo capability and parking. Current features are: Slew & Sync Slew Rates Sidereal, lunar, solar and custom trackrates Full joystick support ...
Read More...

Features This driver supports Alt-Az mounts, but it was tested with Skywatcher Virtuoso. Basic functions such as Track, Sync, and Park/Unpark are supported. General Considerations How to start with a Virtuoso mount: 1. Before connecting, the telesc ...
Read More...

ZWO AM5/AM5 mounts are fully supported in INDI via both USB and WiFI connections. For connecting over WiFi, watch the WiFi Mounts tutorial
Read More...