Directory: All Listings 

Read More...

Read More...

Read More...

Read More...

Read More...

Read More...

Installation RPI Camera Driver currently supports the Raspberry Pi High Quality Camera in full raw mode. Under Ubuntu, you can install the driver via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install indi-rpicam ...
Read More...

INDI (v >= 0.9.7) supports game pads under Linux for input control. The INDI joystick driver (indi_joystick) queries the controller and provide the following properties: Joysticks: Each joystick displays a normalized magnitude [0 to 1] and an angle. ...
Read More...

Read More...

Read More...

Features Provides basic auto guiding interface. Operation Usually the user doesn't control this device directly, but instead uses a client software (such as Ekos) to perform autoguiding and sends pulse commands to the mount using GPUSB.
Read More...

Read More...

Read More...

The Raspberry Pi GPIO driver allows you to control up to five GPIO pins on a Raspberry Pi. Typically, each GPIO pin is connected to an opto-isolator circuit or Raspberry Pi hat to control larger voltages and currents. The driver uses the pigpio library a ...
Read More...

Features The driver supports Starlight Xpress AOLF Active Optics controlled by serial mode command set (parallel mode command set is not supported). Unit can be connected directly to serial port or via usb-to-serial adapter. Read for more information. ...
Read More...

Features DDW is a fully automatic observatory dome control system. Link your dome to a computer for complete automation including telescope slaving and shutter control. It supports the following features: Slave dome rotation to your telescope Rotatio ...
Read More...

Features myDCP4ESP32 is an enhanced 4-Channel automated Dew Controller designed by Robert Brown, based on an ESP32 WiFi chip. The project is open sourced with details found on the project site. Current features include: Fully automated standalone op ...
Read More...

Read More...

Features The driver can control the dome's relative and absolute position and calibrate the dome until it reports a valid azimuth position. The user can setup home and park positions in addition to dome slaving parameters. Furthermore, the user can set u ...
Read More...

Features The driver can completely control the Dragonfly’s relays and Sensors for customizing your observatory needs for remote control. The relays can be used for many things such as switching control voltages to open or close the roof, switching lights ...
Read More...