SkyWatcher: All Listings 

INDI AZ-GTi Driver based on EQMod driver and is released as a 3rd party driver and requires INDI Library >= v1.7.5. Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through WiFi  Goto/Slew at maximum m ...
Read More...

  Features The LX200 Basic supports most functions of the EQ-6 MCU Update: Project Website Project Support and Community Connectivity To ensure proper mount operation and pointing accuracy, connect to mount using either Synscan App OR INDI ...
Read More...

INDI AZ-GTi Driver based on EQMod driver and is released as a 3rd party driver and requires INDI Library >= v1.7.5.   Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through WiFi  Goto/Slew at m ...
Read More...

Installation INDI EQMod Driver is released as a 3rd party driver and requires INDI Library >= v0.9.7. Features This INDI driver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher ...
Read More...

 Features The driver uses SkyWatcher protocol to directly control Alt-Az mounts without the need for the Synscan hand controller. In addition to general Park/Unpark and GOTO (SLEW) capability, it supports SYNC, TRACK and pulse guiding. It is designe ...
Read More...

Features The driver can control any mount controllable by Synscan hand controller, it offers basic GoTo capability and parking. Current features are: Slew & Sync Slew Rates Sidereal, lunar, solar and custom trackrates Full joystick support ...
Read More...

Features This driver supports Alt-Az mounts, but it was tested with Skywatcher Virtuoso. Basic functions such as Track, Sync, and Park/Unpark are supported. Connectivity To ensure proper mount operation and pointing accuracy, connect to mount using e ...
Read More...

Connectivity To ensure proper mount operation and pointing accuracy, connect to mount using either Synscan App OR INDI driver - never both simultaneously. For initial alignment, first perform alignment using Synscan App, then fully disconnect Synscan App ...
Read More...