You must first complete the First Time Setup guide before proceeding with this tutorial.
By default, StellarMate operates in HotSpot mode. Even if configured for WiFi connection or LAN, StellarMate always switches back to HotSpot mode when the other connection mode become unavailable. This is to enable you to always access the device regardless of network avalibility. If StellarMate is connected over Ethernet, the HotSpot is NOT started. It is only started when all connections are unavailable.
There are two methods for Ethernet connections:
A regular straight-thru cable is required to established a connection. Crossover cable is NOT needed. After connecting a straight-thru cable between StellarMate and your PC/Laptop, both devices will be automatically assined an Auto IPv4 address 169.254.X.X, where the X.X can be any number (0 to 255).
The StellarMate Web Manager display the IP address of the unit, including the automatic IPv4 address as illustrated before.
From the example screenshot above, we know the auto-IP address is 169.254.10.197. Now open the terminal application in your operating system and simply type:
After which the PC/Mac should register the IP address and you can start using stellarmate.local address as usual.
A more permenant solution involves creating a static IP address on StellarMate using Network Manager.
No further setup is required. You can directly access StellarMate via the stellarmate.local address.
StellarMate supports connecting to your equipment via WiFi, Ethernet, Bluetooth, or USB. USB is the primary connection method for most astronomical devices. Make sure all equipment are sufficiently powered and initailized before connecting them to StellarMate. For mounts, most mounts need to be already aligned before you connect them to StellarMate.
To learn more about connecting your equipment to StellarMate, find out more in the detailed equipment connection guide.
Ekos is the official Astrophotography Tool used for StellarMate. It is part of KStars, a popular planetarium application for Windows, MacOS, and Linux.
Download and setup KStars on your system before proceeding forward.
When you use Ekos on your PC/Mac, set the profile to Remote and set the Address to stellarmate.local
Make sure INDI Web Manager checkbox is checked.
It is recommended to use the Ekos Profile Wizard to setup your first profile.The wizard automatically starts up the first time you fire Ekos in KStars. To start it again, please the wizard icon in Ekos summary screen.
Click Next to proceed to the next screen
In case you selected #2 above, you have a choice to specify the StellarMate Address & Port. These settings are for advance usage of StellarMate, so just click Next.
Next select your equipment profile name and any additional services you want to run then proceed to create the profile.
To connect to your equipment and start using Ekos, simply click the Start button as illustrated above.
Created : 2018-12-05 09:41:36, Last Modified : 2018-12-05 09:43:24